PIC18F13K50 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
The PIC18F13K50 brings advanced features and exceptional value
to the embedded USB market. This low cost PIC® Microcontroller
features a full speed USB 2.0 compliant interface that can
automatically change clock sources and power levels upon
connection to a host, making it an exceptional device for
battery-powered applications. The addition of mTouch(TM) touch
sensing compatibility, a 10-bit ADC, motor control PWMs, and a
host of serial interfaces make the PIC18F13K50 the perfect
device to "Just add USB" to any application.
USB Application Design Center Debug Support
• A debug header is required for this device
• Part Numbers:, AC244023 (F) / AC244024 (LF)
• Debug and programming support is available via PICkit™ 3, and
MPLAB® ICD 3
• For Debug Header information, please refer to DS51292
2012年9月25日星期二
PIC18F24K20 MCU CRACK
PIC18F24K20 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect.
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect.
chip code extraction
PIC18F14K22 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
Introducing the nanoWatt XLP PIC18F1XK22 Flash microcontroller:
not too big, not too small… just right! This new family of
devices offer all of the advantages of the well recognized
PIC18F High Performance MCUs; 8-bit, C compiler optimized
architecture and an industry leading peripheral set now
available in a low pin-count option. These new 20-pin products
include a 16 MHz precision Internal Oscillator which can be used
with the standard 4X PLL to produce 16 MIPS of performance (64
MHz @ 3V). Standard analog peripherals include 12 channels of
10-bit A/D, Dual Rail-Rail Comparators with improved
input/output multiplexing and an on-chip selectable Fixed
Voltage Reference. Digital peripherals include an Enhanced
Capture/Compare/PWM (ECCP+) module with PWM steering and a
Master Synchronous Serial Port (MI2C,SPI) module with software
controllable address masking. These devices also feature the SR
Latch mode which supports capacitive sensing applications. In
addition to these peripherals, the devices feature several
microcontroller monitors that provide for reliable operation
including BOR (Brown Out Reset) with software enable, POR (Power
On Reset) and an Extended WDT. The addition of nanoWatt XLP
technology make these devices ideally suited for battery powered
applications or designs where power consumption is constrained.
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
Introducing the nanoWatt XLP PIC18F1XK22 Flash microcontroller:
not too big, not too small… just right! This new family of
devices offer all of the advantages of the well recognized
PIC18F High Performance MCUs; 8-bit, C compiler optimized
architecture and an industry leading peripheral set now
available in a low pin-count option. These new 20-pin products
include a 16 MHz precision Internal Oscillator which can be used
with the standard 4X PLL to produce 16 MIPS of performance (64
MHz @ 3V). Standard analog peripherals include 12 channels of
10-bit A/D, Dual Rail-Rail Comparators with improved
input/output multiplexing and an on-chip selectable Fixed
Voltage Reference. Digital peripherals include an Enhanced
Capture/Compare/PWM (ECCP+) module with PWM steering and a
Master Synchronous Serial Port (MI2C,SPI) module with software
controllable address masking. These devices also feature the SR
Latch mode which supports capacitive sensing applications. In
addition to these peripherals, the devices feature several
microcontroller monitors that provide for reliable operation
including BOR (Brown Out Reset) with software enable, POR (Power
On Reset) and an Extended WDT. The addition of nanoWatt XLP
technology make these devices ideally suited for battery powered
applications or designs where power consumption is constrained.
PIC18F23K20 MCU CRACK
PIC18F23K20 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect
microchip chip decrypt
PIC18(L)F1XK22 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
Introducing the nanoWatt XLP PIC18F1XK22 Flash microcontroller:
not too big, not too small… just right! This new family of
devices offer all of the advantages of the well recognized
PIC18F High Performance MCUs; 8-bit, C compiler optimized
architecture and an industry leading peripheral set now
available in a low pin-count option. These new 20-pin products
include a 16 MHz precision Internal Oscillator which can be used
with the standard 4X PLL to produce 16 MIPS of performance (64
MHz @ 3V). Standard analog peripherals include 12 channels of
10-bit A/D, Dual Rail-Rail Comparators with improved
input/output multiplexing and an on-chip selectable Fixed
Voltage Reference. Digital peripherals include an Enhanced
Capture/Compare/PWM (ECCP+) module with PWM steering and a
Master Synchronous Serial Port (MI2C,SPI) module with software
controllable address masking. These devices also feature the SR
Latch mode which supports capacitive sensing applications. In
addition to these peripherals, the devices feature several
microcontroller monitors that provide for reliable operation
including BOR (Brown Out Reset) with software enable, POR (Power
On Reset) and an Extended WDT. The addition of nanoWatt XLP
technology make these devices ideally suited for battery powered
applications or designs where power consumption is constrained.
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone .
Introducing the nanoWatt XLP PIC18F1XK22 Flash microcontroller:
not too big, not too small… just right! This new family of
devices offer all of the advantages of the well recognized
PIC18F High Performance MCUs; 8-bit, C compiler optimized
architecture and an industry leading peripheral set now
available in a low pin-count option. These new 20-pin products
include a 16 MHz precision Internal Oscillator which can be used
with the standard 4X PLL to produce 16 MIPS of performance (64
MHz @ 3V). Standard analog peripherals include 12 channels of
10-bit A/D, Dual Rail-Rail Comparators with improved
input/output multiplexing and an on-chip selectable Fixed
Voltage Reference. Digital peripherals include an Enhanced
Capture/Compare/PWM (ECCP+) module with PWM steering and a
Master Synchronous Serial Port (MI2C,SPI) module with software
controllable address masking. These devices also feature the SR
Latch mode which supports capacitive sensing applications. In
addition to these peripherals, the devices feature several
microcontroller monitors that provide for reliable operation
including BOR (Brown Out Reset) with software enable, POR (Power
On Reset) and an Extended WDT. The addition of nanoWatt XLP
technology make these devices ideally suited for battery powered
applications or designs where power consumption is constrained.
2012年9月12日星期三
订阅：
博文 (Atom)